Double Glazed Window Repairs
Double glazing is an excellent investment for your home, but it can be a pain when it isn't working correctly. Most issues can be addressed and you don't have to replace windows or doors.
Double-glazed windows are made up of two glass panes separated by a thin gap. This gap is filled with an insulating gas, like argon. This increases a window's thermal efficiency.
Broken panes
Double-paned windows are harder to break than single panes of glass, however, they may still break or crack. It is crucial to repair any broken panes in double glazing as soon as possible in order to avoid loss of energy and moisture.
Depending on the severity of the crack, you may decide to fix it with a temporary fix or go for a more intensive repair using epoxy. A temporary repair can help prevent further cracks, and also keep out cold air and rain. A more extensive repair may reinforce the crack and create more secure seal.
To replace a double-pane broken window, remove the frame and place it on a flat surface. Install a duct tap grid over the pane in order to prevent any glass fragments from falling during removal. Once the tape is secured then pull the old double pane glass off of the frame. Then, clean the rabbet and grooves using a wire brush, vacuum or wipe them with a damp cloth. If needed, take off the wood molding and scrape away any metal or putty before installing the replacement pane. Apply a silicone caulk over the rabbet and grooves in order to ensure an ideal fit.
If you're planning to repair the cracks in your window yourself, start by sanding the rabbet until it's smooth and clear of paint or gunk. You could also use a heat gun to soften any glazing or putty points. Once the rabbet is cleaned the putty knife can be employed to press the rope of putty into position. Make sure the putty is a uniform thickness and is pressed against the glass and frame evenly.
If you're looking for the long-term solution, you can opt for an epoxy repair instead of replacing. This is more expensive and will require a longer wait time, but can be more appealing. It will also last longer than a temporary fix.
Condensation
Condensation is a frequent problem with double-glazed windows, but that doesn't mean they're defective. It's a good thing that your windows display condensation. This means that the double glazing is functioning as it should, keeping out the cold while allowing the warmth.
If you notice condensation appearing on the outside of your window, it is actually water vapor from the inside of your home that has cooled down and condensed on the glass's surface. It's a natural process that won't cause harm to your windows unless you leave it on the surface too long.
The cause of internal condensation is usually too much humidity or low temperatures in the room. This results in cold surfaces, such as windows which draw in moisture that is high in dewpoint (the temperature at which water transforms into a liquid). Humidity is also inevitable around kitchens and bathrooms due to steam from kettles or showers as well as hot pots and pans used during cooking.
Avoid hanging wet clothing near windows and make sure your uPVC frames are well ventilated to prevent moisture buildup. To ensure Repair My Windows And Doors , you must also make sure that your double-glazed windows are constructed correctly and have the proper gap (6mm). You can also add air vents that are one-way on your windows to increase the insulation. If you're still seeing condensation, there is likely a problem with your seals or gaskets. This is a job best left to professionals.
Draughts
A double-glazed window that is draughty is an indication that the seal between your glass panes has failed and will require to be replaced. This could affect the insulation of your home and can result in an increase in energy costs, so it's important to act quickly when you notice the issue.
A window repair service will replace the sealed unit for you, while restoring the efficiency of your windows. They can also upgrade your existing frames to include new energy saving features, such as argon gas filled glass units with thermal spacer bars that will cut down on the loss of heat and reduce the cost of heating.
It is also worth checking the locking mechanisms on your double-glazed windows. It's common for older uPVC window lock mechanisms to stiffen with age. This can be easily fixed by lubricating your locks regularly using a specialist uPVC cleaner.
A professional double glazing company will ensure that the repair is completed correctly. They will have the right tools to ensure that your window is sealed and watertight. They'll also be able to repair any other damages to your frame so you can enjoy your stunning new double-glazed window with confidence.
Double-glazed windows are durable and long-lasting, but they can experience issues due to weather conditions or wear and tear. Call your local double-glazing repair service immediately if you discover any of these problems. You'll be glad you did - a well-repaired double glazing installation will give your house the tangible impression of quality, and it will also save you money on your energy bills!
Smudging
Double-glazed windows comprise two panes that have a spacer, air or dense gas between them to make an effective seal that blocks heating from entering the frame. They are a great method to save energy and reduce your carbon footprint. Double glazing can be plagued by a number of problems that can impact its performance and life span. These include fog, condensation, and difficulties to close or open.
If you're having difficulty opening your double-glazed windows, it could be because of the weather. It could also be due to a issue with the hinges or handles. It is possible to solve the issue by lubricating and wiping the windows with cold water. Contact the company who sold you windows as soon as you can to get them fixed.
If your windows or doors have sagged or dropped over time, this is another common issue that can be easily fixed by an experienced professional. It is also worth checking the warranty to see what, if any, repairs are covered under this warranty.
Fogged or foggy glass can be caused by the presence of moisture between the panes. It's typically a sign that the seals aren't functioning properly or the double-glazing system needs to be replaced. This is a straightforward fix that can be done without the need to replace the whole window.
To fix this problem, a technician will make small holes to release any moisture that is trapped between the glass and the rest the window. After the moisture has gone the new anti-fog coating will be applied and the window sealed. Sometimes, the window will need to be removed before this happens but the majority of the time, it can be carried out from inside the home.
Mist
Double glazing that is older can have a mist problem, especially when it occurs both inside and outside the window. It is due to an issue with the seal designed to keep moisture and air between the two panes. This seal is created during the production of double-glazed units by sealing the two panes using an airtight polysulphide seal or butyl seal around the edges and a spacer bar. This seal is designed to keep the window from leaking and to provide insulation. It can be difficult to clean windows with mist because you have to break the seal in order to do so.
The problem with mist is that it lets moisture to enter, which ultimately results in condensation between the glass panes. This is due to a large difference in temperature between the external and internal surfaces of the glass. The moisture is then trapped in the spaces and creates an appearance of milky white. This can be extremely unsightly and is difficult to remove.
Some companies claim they can repair misting double-glazed windows through drilling holes in the unit and injecting chemical through the holes that absorbs moisture from the inside. But, this isn't a permanent solution to the problem and it is far easier to replace the entire double-glazed unit if suffering from misting.
It is important to keep your windows clean and ventilated regularly. It is also a good idea to use extractor fans in kitchens and bathrooms and wipe windows with a damp cloth to reduce the accumulation of moisture. If you're unable to prevent the problem, we recommend replacing your double-glazed windows with new A-rated windows to increase energy efficiency.